Quad 606

  • No one logged in.

01-May-2018 01:28 AM

shaf

shaf

Posts: 1

Hi i have recently bought a quad 606 mk2 to go with the quad 34 pre amp, today i turned on and nothing is happening the pre amp comes on but 606 nothing no green light no output.

Any help will be appreciated.

Thanks

  Reply

03-May-2018 10:35 AM

LOWTHERMAN62

LOWTHERMAN62

Posts: 28

Hello, Have you tried the main fuse on the back of the panel . should be checked with a multimeter and if blown replaced with a 4 amp antisurge fuse. If you are powering directly from the plug point the lead should have a 13amp fuse . If powering from the output of the preamp check that you have power and that the lead is not faulty.. These are the obvious things first.

Regards Stewartf 

  Reply

03-May-2018 10:39 AM

hummph

hummph

Posts: 34

Start by checking the overload cut out on the back of the 606.If that's ok plug the mains lead directly into the 606.If that doesn't work then you will need to check the internal fuses.Any blown would indicate further investigation is necessary.

I assume you have checked the on/off switch on the back?

  Reply